-ATNEDCVH

UD951B - How to use the H951BT unit on the computer?

At present, this UD951B only supports windows system. If you want to use the computer to play music or output 5.1, please follow the steps below:

1. To Install the corresponding system driver of this unit.
The supported system drivers are Windows XP / Vista / 7 / 8 / 10. The driver can be got in the USB flash disk attached with the product or online from our website (please click "download" to find the corresponding " H951BT " driver to download.

2. After installing the driver, you only need to light up the indicator light (blue) in front of "S / PDIF output" in the interface, and then the right side of the interface will display S/PDIF out set the completion point "OK". Then you connect the amplifier and all the speakers.

3. Open the system audio settings, set the audio output device to "digital output USB PNP sound device", click "OK", and then you can play music.

-----------------------------------------------------------------------------------------------------------------------------------

For the "analog output is only 2CH" in the software interface, you can ignore it. Because the settings there have no affecting for the final playback effect.You don't need to worry about whether there is only 2CH analog output option on the driver interface.

The H951BT PC-USB input is based on CM108 chip, which has powerful functions, including 2CH analog output and S/PDIF digital output, even mixing effect, etc., All of these will be displayed on the interface.

But the H951BT only uses its S / PDIF Digital Output function, output to another more professional AC3 / DTS 5.1 decoding chip by S / PDIF Digital, decode it into 5.1 analog output. The CM108 The 2.0 analog function of the chip is not used in our products, even if the chip with 2.0 analog output. So we just need Select S / PDIF output, others we can ignore.